User Guide Of Iron Man MK5 Helmet

1. Get it started

First, put 4 AA batteries in the helmet and 2 AAA batteries in the remote control, then power up your helmet. Gently press both sides of the back chunk of the mask to pop it off. Put on the helmet, then reattach the back chunk. There is a guiding magnet on it to help you position it correctly—when you do this, they will click into place, letting you know you've done it right.

2. Voice Commands

Wake Up Command: "Jarvis"
the helmet:"Hello."

Vioce Command: "start system"
the helmet:"Hello, am Jarvis."

Vioce Command: "open the mask"
the helmet:multiple plates rise

Vioce Command: "close the mask"
the helmet:multiple plates close

Vioce Command: "start combat mode
the helmet: eye lights turn to red

Vioce Command: close combat mode
the helmet: eye lights turn to white

Vioce Command: " shutdown system
the helmet: "Enjoy your self,sir."

3. Remote Control

Turn on the side switch,see the power indicator light-on,you can use the remote:

Button A: Full mask open/close.

Button B: Multi-piece open/close.

Button C: Eye light on.

Button D: Eye light off.

Button E: Sound effect on/off

4. Touch Controls

5. Safe operation warning

• Precautions for Power-on: Before turning on the helmet each time (or when restarting the system power), ensure the mask is closed smoothly. If the mask is partially or fully open, gently close all parts manually.
• If the product will not be used for a long time, please remove the dry batteries.
• It is strictly forbidden to manually force open the mask for playful purposes, and to obstruct the helmet's opening and closing movement. Such actions will cause irreversible damage to the helmet.
• Non-professionals should not disassemble the product.
• If the faceplate can't open smoothly,according to our experiences, the majority of faceplate issues (won't open or opens roughly) are caused by low battery voltage. Simply replace all 4 AA batteries with fresh ones and you should be good to go.